Mitsubishi Electric FR-LU08, Инструкция по эксплуатации

Страница: 44 / 53

44
MENU
(6) Verifying the project of the PLC function stored on a USB memory device with that of the inverter
1
Copy the project of the source inverter to a USB memory.
(Refer to
page 43 .)
2
Connect the FR-LU08(-01) and a USB memory device to the
target inverter.
3
Display the Function menu, turn to move the cursor to
[USB Memory Device], and press .
4
Turn to move the cursor
to [PLC Project Copy], and
press .
5
A file name selection screen
appears. Turn to move
the cursor to the target file,
and press .
(SET)
BACK S E T N E X T
USB Memory Device
USB Parameter Copy
PLC Project Copy
SET
STOP PU
(SET)
BACK S E T N E X T
PLC Project Copy
Folder Name Select
SET
STOP
PU
PRG01
(SET)
6
Turn to move the cursor
to [3: Verify], and press .
7
A confirmation screen
appears for execution.
Press to execute the
verification.
8
If a verification error occurs,
the verification is stopped and
an error screen appears.
Press to return to the
screen of step 7.
BACK S E T N E X T SET
STOP PU
PLC Prjct Copy: PRG01
1 : Copy INV to USB
2 : Write USB to INV
3 : Verify
(SET)
BACK S E T N E X T
3 : Verify
SET : Execution
BACK : Cancel
STOP
PU
SET
PLC Prjct Copy: PRG01
(SET)
S E T
- - - S T O P P U
Verify Error
S E T S E T
- - - S T O P P U
PLC Prjct Copy: PRG01
B A C K
(BACK)