Mitsubishi Electric FR-LU08, Инструкция по эксплуатации

Страница: 24 / 53

24
FUNCTION AND BASIC OPERATION
2.3 Direct setting
When setting Pr.1000 Direct setting selection , it is possible to switch from the Main monitor screen to the set point setting
screen for PID action using . On each setting screen, turn to input a setting value, and press to confirm the
setting.

This setting is available only when the inverter supports this function. (Refer to page 7 .)

When Pr.1000 ="0"

When Pr.1000 ="1"

When Pr.1000 ="2"

Not displayed when PID control is disabled ( Pr.128 ="0").

Indication of [NEXT] is not displayed when Pr.1000 ="0".
To switch back the monitor display from the Direct screen or the Frequency setting screen to the Main monitor screen, press
.
Pr.1000 setting

Description
0 (Initial value) Displays the Frequency setting screen.
1 Displays the Direct (set point setting) screen.
2 Displays the Direct (set point setting) screen and the Frequency setting screen.
(SET)
One of the Main monitor screen
Example of screen switching and shifting when the PID control is enabled (
Pr.128 ≠
"0")
Direct #1 screen
∗5
Direct #2 screen
∗5
Frequency setting screen
∗6
(NEXT) (NEXT)
(NEXT)
∗4
(NEXT)
∗3
∗2
∗3,∗4 ∗3,∗4 ∗4
PREV SET NEXT
STOP PU
Hz
Output frequency
1 2 : 3 4
0.00
N E X T BACK SET NEXT
STOP PU
Frequency Setting
Pres value
Set value
0.00Hz
100.00Hz
10.0PSI
10.0PSI
N E X T BACK SET NEXT
STOP PU
PID act set pnt
Pres value
Set value
10.0PSI
10.0PSI
N E X T BACK SET NEXT
STOP PU
2ndPID set point
Pres value
Set value
(BACK)