Mitsubishi Electric DX-TL900U, Инструкция по установке и эксплуатации

Страница: 20 / 76

20
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic Operations (continued)
♦
TIME DATE ADJUST
Before starting recording, it is necessary to set
accurately the current date and time.
Example : Set the date/time to 10/28/2003 6:30pm
(18:30)( default : “01/01/2003 00:00:00” ).
1. Press the SET UP button to display the <SETTINGS>
screen.
2. Check to see that the cursor (>>) is positioned at “TIME
DATE/DISPLAY SETTINGS”, and then turn the SHUTTLE ring
clockwise.
• The <TIME DATE/DISPLAY SETTINGS> screen appears.
3. Check to see that the cursor is positioned at “TIME DATE
ADJUST”, and then turn the SHUTTLE ring clockwise.
• The <TIME DATE ADJUST> screen appears.
<TIME DATE ADJUST>
>>DAYLIGHT SAVING OFF
MONTH 01
DAY 01
YEAR 2003
TIME 00:00:00
4. Turn the JOG dial to move the cursor to “MONTH” and turn
the SHUTTLE ring clockwise.
• The background of “MONTH” changes to red and flashes.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
>>MONTH 01
DAY 01
YEAR 2003
TIME 00:00:00
5. Turn the JOG dial to display “10” and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
>>MONTH 10
DAY 01
YEAR 2003
TIME 00:00:00
6. Turn the JOG dial clockwise to move the cursor (>>) to
“DAY”.
When turning the JOG dial clockwise, the cursor
(>>) moves down. When turning counterclockwise,
the cursor (>>) moves up.
7. Repeat steps 4 - 6 to set “DAY” and “YEAR”.
8. Turn the JOG dial to move the cursor (>>) to “TIME” and
turn the SHUTTLE ring clockwise twice.
• The “TIME” display reverses in color when the SHUTTLE
ring is turned the first time. When the ring is turned for the
second time, the display turns red and flashes.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME 00:00:00
9. Turn the JOG dial to display “18” and turn the SHUTTLE
ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME
18 :00:00
The time is indicated using the 24-hour system.
10. Repeat steps 8 and 9 to set “MINUTE” and “SECOND”.
11. Turn the SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
<TIME DATE ADJUST>
DAYLIGHT SAVING OFF
MONTH 10
DAY 28
YEAR 2003
TIME 18:30:
00
12. Turn the SHUTTLE ring counterclockwise.
♦
Present time display
When turning on the unit power, the time/date display shown
below appears (in the case of DISPLAY MODE 3).
For setting other display modes, see “DIS-
PLAY MODE” page 30.
During recording, the used HDD space is dis-
played. When recording is stopped, the display is
cleared (with the exception of when pausing record-
ing). The HDD usage display appears again after a
few moments when recording is started once more.
INFORMATION
This unit uses 4 digits to display the year. The
allowed display range is 99 years between 1/1/
2001 - 12/31/2099. The unit is also equipped with
a function to automatically calculate leap years./
The date returns to the year 2001 after 12/312099.
♦
Recorded capacity display function
01-01-2003 WED
00:00:00 15P 99
%
A00001
Year Month Day
Day of
the week
Alarm recording number
Minute
Second Hour
Recording interval
Recorded capacity of
the Hard Disk
This unit displays the used space of the specified record-
ing device (HDD) on the screen when “REMAIN HDD” of
the <REAR TERMINAL SETTINGS> screen is set to “HDD”.
The “%” indicates the used amount of HDD against the
total HDD capacity. The following settings are required to
enable this function.
1) Select the device and set the remaining capacity using
“REMAIN HDD” of the <REAR TERMINAL SETTINGS>
screen (
see page 46).
2) Select “3” for “DISPLAY MODE” in the <TIME DATE/
DISPLAY SETTINGS> screen (
see page 30).