S e r v i c e I n f o r m a t i o n
OWNER’S HANDBOOK 4-5
Fitting
1.
Locate an empty drive tray. It may be wise to keep a written record
of which trays are fitted with drives. You can identify a specific
drive by observing the labelling scheme as shown in the following
illustration:
1
2
3
4
A
B
C
D
E
Figure 4-4 Disk Subsystem Labelling Scheme
In addition to the external labelling scheme, each SCSI drive,
including the appropriate removable media drives, is assigned a
SCSI identification number. The ID scheme for each hard disk drive
module, labelled A-E, is the same. The following table indicates
these numbers:
Drive
SCSI ID Number
Hard Disk, Position 1
0
Hard Disk, Position 2
1
Hard Disk, Position 3
3
Hard Disk, Position 4
4
CD-ROM Drive
5
1st Tape Backup Drive
2
2nd Tape Backup Drive
6
Your system displays these numbers during Power On Self Test
(POST).
2. To remove an empty tray, turn the release handle anti-clockwise
until it stops, which is almost one complete turn. As you turn the
handle, the tray ejects slightly.
Содержание Apricot
Страница 1: ...apricot MITSUBISHI ELECTRIC Shogun OWNER S HANDBOOK ...
Страница 2: ...OWNER S HANDBOOK ...
