Mitsubishi Electric 1100A Series Скачать руководство пользователя страница 9

Страница: 9 / 62

1100A SERIES UPS

OWNERS / TECHNICAL MANUAL

Page Number:

1-3

MITSUBISHI ELECTRIC 1100 SERIES UPS

CAUTION

PRECAUTIONS FOR INSTALLATION

Do not block the intake/exhaust ports.

- If the intake/exhaust ports are blocked, the internal temperature of the UPS will rise

and could lead to fires from battery electrolyte leakage, fire ignition or part

deterioration.

- Exhaust from the rear of the equipment can be released at elevated temperatures. If

any other equipment is expected to be installed in area behind this one, put adequate

distance between the two.

Follow the UPS instruction manual carefully when installing the unit.

-Improper installation could lead to injury such as the UPS falling over, etc.

PRECAUTIONS FOR WIRING

The power supply for this unit must be three phase rated in accordance with the

equipment data plate. It must be suitably grounded.

-Failure to ground the unit could lead to electrical shocks.

PRECAUTIONS FOR USE

If a unit fault, abnormal odor or noise occurs, turn off the UPS input switch.

-Failure to do so could lead to fires.

Do not insert blunt objects or fingers, etc., in the fan.

-Failure to observe this could lead to injuries.

Do not insert blunt objects or fingers, etc., into the unit's input/output section.

-Failure to observe this could lead to electrical shocks.

Ventilate the UPS surroundings.

-Failure to do so could lead to container rupture or to explosions from the gas generated

from the battery system.

Prohibit smoking and the use of fire around the unit.

-Failure to do so could lead to injuries, damage or fires from explosions.

Do not place containers that have water or any liquids on the UPS.

-If the container tips over and the water or liquids spills, this could lead to electrical

shocks and to fires in the UPS.

Do not sit on, step on or lean on the UPS.

-Failure to observe this could lead to injuries if the UPS tips over.

Содержание 1100A Series































































Результаты поиска

Содержание 1100A Series

Отзывы:

Похожие инструкции для 1100A Series

Бренды по названию

Популярные бренды

Mitsubishi Electric 1100A Series, Руководство технического владельца

Результаты поиска

Содержание 1100A Series

Отзывы:

Похожие инструкции для 1100A Series

Бренды по названию

Популярные бренды