1100A SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
2-2
MITSUBISHI ELECTRIC 1100 SERIES UPS
MENU
Refer to
FIGURE 2.20 for the SCREEN MENU tree.
A)
MAIN MENU (FIGURE 2.2)
The LCD panel indicates power flow and measured values, while also operating the
start/stop function. The LCD panel also allows the user to verify the status and operation of
the UPS Module.
Figure 2.2
Main screen
The following will be displayed when the START/STOP key on the SCREEN SELECT
MENU (FIGURE 2.5) is pressed (Jump into
OPERATION MENU
):
1) Startup/Shutdown Guidance
(FIGURE 2.3, FIGURE 2.4)
The display indicates the Startup and Shutdown guidance for the UPS system. If this
operation is PIN protected, the user is required to enter the security PIN before the
screen can be accessed.
When in remote mode, the message “REMOTE operating model” will appear on this
Screen. The user cannot operate the start and stop functions without changing the
setup from remote mode to local mode.
When bypass voltage is abnormal, the message “Bypass voltage abnormal” will appear.
- Stop:
When the bypass voltage is abnormal, the user cannot transfer from inverter to
bypass line.
Figure 2.3
Startup guidance
Figure 2.4
Shutdown guidance
Follow Startup/Shutdown guidance accordingly.
2) SCREEN SELECT MENU
(FIGURE 2.5)
This screen shows all screen menus.
Figure 2.5
Screen select menu
