Mitel MiVoice 5340e Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 97

background image

5330e/5340e IP Phones – User Guide

Handset/Headset Combinations

The following combinations of corded and cordless headset and handset are supported on
the 5330e/5340e IP Phone:



Corded handset only



Corded handset and corded headset



Cordless handset only



Cordless handset and cordless headset



Corded handset and cordless headset



Corded headset and cordless handset

The DECT Cordless Handset, DECT Cordless Headset, and Bluetooth Handset are all Mitel-
branded accessories available only from Mitel. Bluetooth headsets are third-party
accessories available from a variety of manufacturers.

Pairing the Cordless Module and Accessories

Before using a cordless handset or headset, it must establish communication with the
Cordless Module using a procedure called pairing.

Pairing a DECT Cordless Accessory with a DECT Cordless Module

Notes:



An IP phone can have only one DECT Cordless Handset and one DECT Cordless

Headset.



A cordless handset or headset can be paired with only one IP phone at a time.



Pairing a new cordless handset or headset with the IP phone overwrites the

configuration of any previous handset or headset



Pairing cannot be performed when the cordless device is already in use.

To pair a DECT cordless accessory:

1. Ensure that the battery of the cordless device to be paired is at least partially charged.

2. Press and hold the pairing button on the back of the Cordless Module (see page

72

) for 5

seconds to activate phone pairing mode. The LED on the Cordless Module blinks. The
Cordless Devices application opens on the phone and prompts you to place the
accessory in pairing mode.

3. Press and hold the hookswitch on the side of the cordless handset (see page

77

) or

headset (see page

80

) for 5 seconds to activate accessory pairing mode. The LED on the

cordless accessory blinks. After a moment, the Cordless Devices application displays
protocol, firmware, hardware, and IPEI information for the device to be paired.

Note

: If the LED on the Cordless accessory does not start to blink after 10 seconds,

the accessory requires charging or is still in factory battery saving mode (handset

- 73 -

«
...
79
80
81
82
83
...
»

Содержание MiVoice 5340e


































































































Отзывы:

Нет отзывов

Похожие инструкции для MiVoice 5340e

Бренд: NEC Страницы: 19

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 2

Бренд: Warner Telecom Group Страницы: 6

Бренд: Samsung Страницы: 2

Galaxy MEGA SGH-I527

Бренд: Samsung Страницы: 237

Galaxy j7 Crown

Бренд: Samsung Страницы: 33

Бренд: Samsung Страницы: 39

Бренд: Samsung Страницы: 28

Exclaim SPH-M550

Бренд: Samsung Страницы: 226

Бренд: Samsung Страницы: 12

E630 - SGH Cell Phone

Бренд: Samsung Страницы: 103

DoubleTime SGH-I857

Бренд: Samsung Страницы: 225

Delve SCH-R800 Series

Бренд: Samsung Страницы: 180

Бренд: Samsung Страницы: 10

Бренд: Samsung Страницы: 7

Galaxy Music GT-S6010

Бренд: Samsung Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды