Mitel MiVoice 5340e Скачать руководство пользователя страница 48

Страница: 48 / 97

5330e/5340e IP Phones – User Guide

To answer a call using Handsfree Answerback:

Phone state before Page arrives

To answer the Direct Page

Phone is idle and MUTE
is flashing

1.  Check that MUTE is OFF.
2.  Listen for the paging party.
3. Begin speaking.
4.  Lift the handset if you wish to switch from a Handsfree

call to a handset call.

You are on a handset or headset
call, and MUTE is OFF

1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are now

speaking to the paging party and have muted your
handset/headset call.

3. Speak to the paging party. Press MUTE to alternate

between handset/headset and handsfree calls.

You are on a MUTED
handset/headset call, OR, you are
on a Handsfree call

The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.

To end a Handsfree Answerback call:



Press

either (

SPEAKER

) or

(

CANCEL

When the Handsfree Direct Page call ends, the

MUTE

key light returns to the state it was in

before the call was established.

Direct Paging - Handsfree Answerback Disabled

Your administrator enables or disables Handsfree Answerback and you can also turn it on or
off on your phone. To turn Handsfree Answerback off, see

Direct Paging - Handsfree

Answerback Enabled

. When Handsfree Answerback is disabled on your phone and you

receive a Direct Page, the Direct Page is indicated by a single burst of tone.

To answer Direct Page calls when Handsfree Answerback is disabled:

Phone state before Page

arrives:

To answer the Direct Page

(indicated by single burst of tone):

Phone is idle and MUTE is OFF.

1. Check that MUTE is ON solid.
2. Lift the handset OR press the

MUTE

key to answer in

Handsfree mode. (The light turns OFF.)

3. Begin speaking.

You are on a handset call or
headset call, and MUTE is OFF

1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid and you are now

speaking to the paging party and have MUTED your
handset/headset call.

3. Speak to the paging party. Press MUTE to alternate

between handset and handsfree calls.

You are on a MUTED handset/headset
call, OR, you are on a Handsfree call

The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.

- 40 -

Содержание MiVoice 5340e


































































































Результаты поиска

Содержание MiVoice 5340e

Отзывы:

Похожие инструкции для MiVoice 5340e

Бренды по названию

Популярные бренды

Mitel MiVoice 5340e, Руководство пользователя

Результаты поиска

Содержание MiVoice 5340e

Отзывы:

Похожие инструкции для MiVoice 5340e

Бренды по названию

Популярные бренды