Revision 1.00 beta – April 2019
12
TX – Indicates transmit mode
TUN – Tunning procedure is initiated or optional tuner is presently working
CMP – Optinal SSB compressor unit is activated
MONI – Monitoring own signal on transmit. Can be activated with CW/phone modes
PRE – First receiver preamplifier is switched on
АТТ – Receiver 12db attenuator is activated
NAR – Optional narrow bandwidth filter is activated
NB – Optional pulse noise blanker unit is activated
LSB – lower side band mode
USB – upper side band mode
CW – Continuous wave – morse code (telegraph) mode
CW-R - Continuous wave – morse code (telegraph)mode in reverse mode.( Receives
LSB)
RTTY – Digital modes (not active with sw ver. 1.00b)
RTTY-R Digital modes reverse (not active with sw ver. 1.00b)
AM – Amplitude modulation mode (not active with s/w ver. 1.00b)
FM – Frequency modulation mode (not active with s/w ver. 1.00b)
VFO A – variable frequency oscillator tuning A
VFO B - variable frequency oscillator tuning B
M – memory mode
AGC – Fast acting AGC (automatic gain control) is selected
AGC S – Slow acting AGC (automatic gain control) is selected
AGC OFF – AGC (automatic gain control) is deactivated
SPL – Split frequency mode is used
RIT – Receiver incremental (Fine) tuning. 4 digits sub LCD
XIT - Transmitter incremental (Fine) tuning.
PC – Radio is connected with PC via USB
RF - RF power scale 0 – 100%
S – S-meter scale from S1 to S9 +60db
SWR – Standing wave ratio scale
ALC – Transmitter automatic level control working zone
FST – Fast tuning is activated >100Hz per revolution of main dial
SCAN – Frequency/channel scanning
– Lock function
