Revision 1.00 beta – April 2019
7
3. Before operation
3.1. Front panel controls
RGO ONE transceiver is operated by 15 buttons, three mechanical encoders, main
dial optical encoder, one dual concentric potentiometer AF/RF (10kohm/logar
10kohm/linear). The equipment has large custom multicolor backlit FSTN liquid
crystal display (LCD)and two red LEDs, so various parameters like frequency,
modes, signal strength and others can be displayed. Front panel is shown on fig.1
fig.1
1.
On/Off/meter/tune buttons
2.
LCD
3.
Numeric/function buttons
4.
TX/ALC LED indicator
5.
MIC connector
6.
Phones 3.5mm jack
7.
Power/Bandwith/Compression level encoder
8.
Key speed/Mic gain/Monitor level encoder
9.
Main dial frequency knob
10.
RIT/XIT/Function parameter encoder
11.
Dual concentric potentiometer for audio (AF) volume (inner knob)/RF gain
control (outer knob)
