Revision 1.00 beta – April 2019
31
10. Band plan and band limits assignment
RGO ONE has 11 bands that can be turned on and off. Also proper limits of each
band can be assigned
Enter Band plan and band limits menu
Push and hold ENT LOCK button while switch on the transceiver enters hidden
service menu 79
Function selection is controlled by encoder 3 or UP REC and DOWN PLY buttons.
Parameter selection is controlled by encoder 4
79 Band plan/limits selection
There are eleven bands available (01-11). Choose which band you like to change with
main dial encoder 4.
Then shortly press encoder 3. If you see OFF on main display then this band is not
allowed (not active). Short press of encoder 2 and the band will be allowed. Lower
limit is shown on display.
Short pressing of encoder 2 again will turn the band off.
Short press encoder 3 button to scroll between lower, higher limit and function 79.
Change the frequency of higher/lower limits by rotating encoder 4.
Exit the menu with long press of MTR MNU button.
ATTENTION When 160/60m hardware option is not installed and bands 01 and 03
are not OFF, the radio will not function properly on those bands
