Revision 1.00 beta – April 2019
22
Level control and BEEP on/off
32 DTR signal – External CW keying on/off
USB port DTR signal can be assigned as a CW keying output
33 RTS signal – External PTT control on/off
USB port RTS signal can be assigned as a PTT line
34 - 36 Reserve functions
37 Software version
Shows current firmware versions
38 Software update of the Main Board microcontroller
Prepares MB microcontroller to be written via USB port
After selecting YES exit the menu with long press of MTR MNU button. Then switch
off the radio then switch on again. RIT/XIT LED will start to blink. Front panel will
work normally but the receiver might be silent. Base (Main Board) microcontroller
may be written via USB port. (See Firmware update manual for more details). After
successfully flash operation revert 38 functon to “no” again and cycle on/off the radio.
39 USER Reset
Clears all memories and operator’s adjustments
Select YES and exit with MTR MNU button in order to complete the function
40 FULL Reset
Clears all settings and user memories to factory default values
