Mirrow Moovo LN4 Series, Инструкции по установке и использованию, предупреждения

Страница: 2 / 27

English – 3
English
GENERAL SAFETY WARNINGS AND
PRECAUTIONS
STEP 1
– Working in safety! 4
– Installation warnings 4
KNOWLEDGE OF THE PRODUCT AND PREPARATION
FOR INSTALLATIONE
STEP 2
2.1 - Product description and intended use 5
2.2 - Components used to set up a complete system 5
STEP 3
Preliminary checks for installation 6
3.1 - Checking suitability of the environment and gate to be automated 6
3.2 - Checking product application limits 6
STEP 4
4.1 - Preliminary set-up work 7
- 4.1. 1 - Typical reference system 7
- 4.1. 2 - Establishing positions of components 7
- 4.1. 3 - Establishing the positions of the gearmotor 7
- 4.1. 4 - Establishing the device connection layout 7
- 4.1. 5 - Checking the tools required for the work 8
- 4.1. 6 - Completing the set-up work 8
4.2 - Preparing the electrical cables 8
INSTALLATION: COMPONENT ASSEMBLY AND
CONNECTIONS
STEP 5
– Installing the automation components 9
STEP 6
– System device installation and connection 11
6.1 - Selection the gearmotor position with respect to the gate, on the
control unit 12
6.2 - Installing and connecting flashing light mod. MF 12
6.3 - Installing and connecting photocells mod. MP 14
– Selecting the photocell pair operating mode 15
6.4 - Installing and connecting keypad mod. MK 16
6.5 - Installing buffer battery mod. MB 17
POWER SUPPLY CONNECTION
STEP 7 18
INITIAL START-UP AND ELECTRICAL CONNECTION
CHECK
STEP 8 18
PROGRAMMING THE AUTOMATION
STEP 9
9.1 - Memorising the devices connected by means of “Bus” cable and the leaf
“Closing” and “Opening” limit positions 19
9.2 - Memorisation of transmitter mod. MT4 20
9.3 - Programming keypad mod. MK 20
ADJUSTMENTS AND OTHER OPTIONAL FUNCTIONS
10 - Automation operation adjustment 21
11 - Memorisation of a new transmitter with control unit “in the vicinity” 21
12 - Deleting data from the control unit memory 22
13 - Automation testing and commissioning 22
14 - Installing and connecting a buffer battery 22
WHAT TO DO IF ... (troubleshooting guide) 23
TASKS RESERVED FOR QUALIFIED TECHNICIANS
– Connecting the automation to the electrical mains with a cable other than
that supplied 24
– Automation testing and commissioning 25
– Product disposal 25
TECHNICAL SPECIFICATIONS OF PRODUCT
COMPONENTS
26
Enclosures: “TECHNICAL DOCUMENTATION” I - VII
CONTENTS