20
Keypad Configuration & Operation
4. Config Info (Command-Menu)
5. Version Info
The first line shows the model number and panel type and the second line shows the software version number. The
version of the software is read as Major.Minor.Revision.
6. Set Time (Command-Menu)
Press down arrow key to see more information.
Configuration type will show how the panel was configured. “Factory
default” means the panel has not been configured, it is as it came
from the factory. “Front Panel” means it was configured at the panel.
“Serial Port” means the configuration was done from a computer
through the serial port. “Modem” means the configuration was
completed remotely through a modem.
If you upload a job configuration to the panel using the PC
configuration utility, the job name will appear on this screen. The job
name can be up to a maximum of 20 characters.
Press down arrow key for further info
If you upload a job configuration to the panel using the PC
configuration utility, the technician’s name (ID) will appear on this
screen. The technician ID can be up to a maximum of 10 characters.
Press down arrow key for further info
Configuration date and time will appear for all means of configuration,
thus revealing date and time configuration was last changed.
This specifies the configuration tool version. It will display 0.0.0.0 if no
PC configurator has been used.
Command Menu/Set Time
1. Daylight saving time
[X] DISABLE ->Default
[ ] ENABLE
Use this function to enable
daylight savings time.
C o n f i g u r a t i o n t y p e :
F a c t o r y d e f a u l t
J o b N a m e :
N o j o b l o a d e d
T e c h n i c i a n I D :
U n k n o w n
C f g . D a t e a n d T i m e :
h h : m m d a y y e a r : m m : d d
C f g . T o o l S / W V e r s . :
V e r s i o n : x . x . x . x
S/ DTC-300A
Version X. Y. Z
1 Daylight Save
2 Time Clock
3 Compensation
D a y l i g h t S a v i n g
[ X ] D I S A B L E
