18
Keypad Configuration & Operation
3. Test Dialer (Command-Menu)
Dialer Test Messages
The following messages will display during the test processes of Lines #1 and #2. The messages that will appear
depend on the status of the dialer and the test results that are found.
Press Enter to test Line #1. Press Cancel to exit
this menu. For a description of test messages,
see
Dialer Test Messages
on the following
page.
Press Enter to test Line #2. Press Cancel to exit
this menu. For a description of test messages,
see
Dialer Test Messages
on the following
page.
This feature flushes all reportable events from
the buffer, clears all dialer troubles and resets
the dialer operation. Press Enter to reset the
dialer. Press Cancel to exit this menu.
The dialer is checking the line for voltage. This
message automatically displays when Manual Test is
selected.
No DC line voltage. The line is dead or no phone line
is connected or the phone line operates at abnormal
voltage.
The dialer is waiting for a dial tone.
This message may indicate a noisy telephone line.
The dial tone was detected and telephone number
dialing is in process.
This message indicates that the dialer failed to send a
DTMF tone.
Waiting for availability of the receiver. The receiver
confirms the availability by sending an Ack tone.
- D i a l e r T e s t -
1 . L # 1 M a n u al t e s t
2 . L # 2 M a n u al t e s t
3 . R e s e t Di a l e r
1 . L # 1 M a n u a l t e s t
2 . L # 2 M a n u a l t e s t
3 R e s e t D i a l e r
.
D i a l e r i d l e n o w
N o D C V o l t
W a i t i n g f o r D i a l t o n e
F a i l e d : N o D i a l t o n e
D i a l i n g R e c e i v e r N o w
N o D T M F t o n e
W a i t i n g f o r A c k t o n e
