16
Keypad Configuration & Operation
Command Menu
The main command menu is pictured below. The first line of the LCD will always show “-Command Menu-“, and the
second line displays the different selections. Use the “UP” and “DOWN” keys to move through the menu, and press
the “ENTER” key to make a selection. To exit from the main command menu, press “CANCEL” or select the “Exit”
menu option and then press the “ENTER” key.
1.View Event Log (Command-Menu)
Note:
Command Menu feature 9 and 10 can only be accessed if jumper JW2 is placed on the main board,
see Table 2.
Select the type of log to view. Press the
“ENTER” key. The system will then show the
log chosen.
Use this function to select the log to view. Either the local or
remote log. The remote log contains all events associated with
the fire alarm panel. The local log contains all events
associated with the DTC-300A-2. Each log can hold up to 500
events.
-Command Menu-
1. View Event Log
2. Clear Event Log
3. Test Dialer
4. Config Info
5. Version Info
6. Set Time
7. Set Password
8. Default Config
9. Dialer Config
10. Input Config
11. Exit
-View Event Logs-
1 Remote Log
2 Local Log
