Miranda Kaleido-X (7RU) Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 43

Miranda Kaleido-X (7RU) Скачать руководство пользователя страница 32

26

Setting Up the Kaleido-X (7RU) Multi-Viewer

XEdit Installation

2

7. Once the installation process has completed, XEdit’s main application window appears:

Notes

• Once it has been downloaded from the multi-viewer, the XEdit application remains on your PC,

and can be launched from the shortcut icon that was created on your desktop in step 5 above.

• You may need to upgrade your Audio Bridge Terminal and Kaleido-RCP2 devices (if available) to

the latest firmware. The update files can be found on the DVD that shipped with your multi-
viewer. Please refer to the

Kaleido-RCP2 Guide to Installation and Operation

, and to the

Audio

Bridge Terminal Guide to Installation and Operation

(available on the DVD) for instructions on

how to determine the firmware level, and how to perform the upgrade for these devices.

See also:

For more information about calibrating your system, configuring rooms, creating layouts, and
operating the monitor wall, refer to the

Kaleido-X User’s Manual

, available on the DVD that

shipped with your system.

«
...
30
31
32
33
34
...
»

Содержание Kaleido-X (7RU)












































Отзывы:

Нет отзывов