10
Setting Up the Kaleido-X (7RU) Multi-Viewer
Changing the Output Resolution
2
Changing the Output Resolution
To set a display’s output resolution from the monitor wall:
1. Connect a mouse to an output card’s USB connector.
2. Right-click anywhere on the monitor wall, point to
Monitor Wall
(if you clicked a monitor), and then
click
Display resolution
:
The
Display Resolution
window appears:
• If you would like the system to automatically select a resolution based on information from the
connected display, select
Use detected monitor resolution
.
• If you would like to manually set (and fix) the resolution, select the desired resolution from the
Default DVI resolution
list:
3. Click
OK
.
The output resolution is adjusted accordingly.