Miranda Kaleido-X (7RU) Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 43

Miranda Kaleido-X (7RU) Скачать руководство пользователя страница 2

ii

0

Copyright © 2007–2011 Miranda Technologies Inc.

All rights reserved.

ATTENTION: please read the following terms and conditions carefully. By using Kaleido-X
documentation, you agree to the following terms and conditions:

Miranda Technologies Inc. hereby grants permission and license to owners of Kaleido to use their
product manuals for their own internal business use. Manuals for Miranda Technologies Inc.
products may not be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose unless specifically authorized
in writing by Miranda Technologies Inc.

A Miranda Technologies Inc. manual may have been revised to reflect changes made to the
product during its manufacturing life. Thus, different versions of a manual may exist for any given
product. Care should be taken to ensure that one obtains the proper manual version for a specific
product serial number.

Information in this document is subject to change without notice and does not represent a
commitment on the part of Miranda Technologies Inc.

Title

Kaleido-X (7RU) Quick Start Guide

Part Number

M808-9905-105

Revision

30 May 2011, 11:23 am

«
1
2
3
4
...
»

Содержание Kaleido-X (7RU)












































Отзывы:

Нет отзывов