manualshive.com logo in svg

Miranda Kaleido-X (7RU), Быстрый старт, Страница: 28 / 43

Поделиться
Скачать
Miranda Kaleido-X (7RU) Скачать руководство пользователя страница 28

22

Setting Up the Kaleido-X (7RU) Multi-Viewer

XEdit Installation

2

The 

Network Configuration

 page is displayed.

7. Change the ABT’s network settings, as necessary, and then click 

Apply & Reboot

.

Step 3: XEdit Installation

The Kaleido-X Layout Editor (XEdit) is used to create layouts and configure the Kaleido-X. When the 
computer with XEdit is connected to the Kaleido-X through a TCP/IP network, you can use XEdit to modify 
layouts and settings directly on the Kaleido-X, or you can work locally on the computer and then export 
your changes to the Kaleido-X.

XEdit is not provided as a standalone application. You download the application to your client PC or laptop 
directly from the multi-viewer.

Note: 

If you purchased more than one Audio Bridge Terminal unit, keep in mind that they all ship with 

the same default static IP address. Make sure to assign each of them a different static IP address before 
connecting them to the network, if DHCP is not used.

Note: 

You can also download XEdit from the Miranda Technical Support portal. Contact 

[email protected] for details.

Содержание Kaleido-X (7RU)












































Отзывы:

Нет отзывов