GUIDE TO INSTALLATION AND OPERATION
66
| XVP-3901
Dynamics for 1 minute.
Click the
Dynamics for 1 minute
button to display the dynamics processing in the meters at the bottom of the panel for
a period of one minute. Dynamics metering is enabled by groups of 16 channels: Channels 1-16 or Channels 17-32,
selected depending on the
Channels
tab selected at the top of the panel
•
The right-hand portion of this section shows the output channels of the dynamics processor on level meters, as
found in the RALM panel.
•
The left-hand side shows approximately how much dynamic processing is being applied to the signal (by
amplitude) on a channel basis.
•
The example shown above is the result of substantial compression being applied to Channel 1
5.8 Audio Outputs panel
This panel provides additional audio processing for the 16
audio channels embedded in the 3G/HD and SD output, and
for the four AES outputs:
•
audio channel shuffling
•
level adjustment
•
mixing
•
audio embedding mode.
The XVP-3901 may be paired with up to two DAP or UAP
cards for additional audio channel inputs to the mixers and
for discrete AES/analog outputs.
You can configure the audio output shufflers/mixers (3G/HD,
SD and AES) differently for an SD input than for a 3G/HD
input. The card will remember the different parameters and
will load them automatically without user intervention based
on whether the video input is SD or 3G/HD. Ensure the card
has a video signal of the desired format before changing the
configuration.
The panel has a set of tabs at the top to allow the
appropriate audio channels to be accessed (figure 5.49). The
available controls are virtually identical in all cases, so they
will be described only once.
Figure 5.50 Audio Outputs panel
Figure 5.49 Dynamics for 1 minute display