Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 65

Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 9

GUIDE TO INSTALLATION AND OPERATION

XVP-1801 |

5

2 Installation

2.1 Unpacking

Make sure the following items have been shipped with your XVP-1801. If any of the following items are
missing, contact your distributor or Miranda Technologies Inc.

•

XVP-1801 HD/SD Universal Video Processor/Converter

•

XVP-1801-110-QRP or XVP-1801-75 -QRP Quadruple Rear Panel. If you ordered the new 3RU rear,

you could have an XVP-1801-110-3DRP or XVP-1801-75 -3DRP Double Rear Panel for the Densité
3RU frame. See figure 2.2

2.2 Installation in the Densité frame

The XVP-1801 and its associated rear connector rear panel must be mounted in a DENSITÉ frame. It is not
necessary to switch off the frame’s power when installing or removing the card. See the DENSITÉ Frame
manual for detailed instructions for installing cards and their associated rear panels.

The XVP-1801 has multiple inputs and outputs, and requires a quadruple-width rear panel.

With the quadruple–width rear panel installed, the XVP-1801 must be installed in the second slot from the
right-most of the 4 slots covered by the panel in order to mate with the panel’s connectors. If it is placed in
the wrong slot, the front panel LED will flash red. Move the card to the designated slot for correct operation.
No damage will result to the card should this occur.

2.3 ABUS Connection to Companion Audio Cards

When the XVP-1801 is used in conjunction with one or two companion audio cards (Miranda’s AAP, DAP or
UAP series), the ABUS flat cable must be installed between the ABUS connector of the XVP-1801 and the
connectors on the audio cards. The ABUS flat cable is supplied with the audio card.

Figure 2.1

ABUS flat cable installation

Note:

If only one audio card is used, you must use the two end connectors on the ABUS cable, and leave

the center connector unplugged

XV
P-
18
01

U

A

P-
XX
XX

D

A

P-
XX
XX

«
...
7
8
9
10
11
...
»

Содержание DENSITE XVP-1801


































































Отзывы:

Нет отзывов