Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 52

Страница: 52 / 65

GUIDE TO INSTALLATION AND OPERATION

| XVP-1801

XVP Upgrade option:

This option can be used to upgrade an XVP-1801-
UC, -ARC, -DC, or -XC model to a full XVP-1801.

•

The option name varies depending on which

model you have. See your Miranda
representative for more details.

•

The tab for this option does not appear in this

group when the card is a full XVP-1801 (as
shown in fig. 3.34).

3.5.15 The

Alarm Config

group

This panel allows the alarm reporting of the
XVP-1801 to be configured. The panel
opens in a new window when the button is
clicked, and can be resized if needed.

The panel is organized in columns.

Status/Name

This contains an expandable tree listing all
the alarms reported by this XVP-1801 card.

•

Each alarm name includes an icon

that shows its current status

•

Some alarms may be text-only and

the alarm status is shown in the
name and not by a status icon

The

Card LED

Overall alarm

and

GSM

contribution

columns contain pulldown

lists that allow the level of contribution of
each individual alarm to the alarm named in
the column heading to be set.

•

If there is no arrowhead in the box,

there is no pulldown and the alarm is
not user-configurable

Figure 3.38

Alarm Configuration panel

Figure 3.37

Options group – XVP Upgrade (Full)

Содержание DENSITE XVP-1801


































































Результаты поиска

Содержание DENSITE XVP-1801

Отзывы:

Miranda DENSITE XVP-1801, Руководство по установке и эксплуатации, Страница: 52 / 65

Результаты поиска

Содержание DENSITE XVP-1801

Отзывы: