Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 65

Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 51

GUIDE TO INSTALLATION AND OPERATION

XVP-1801 |

47

Figure 3.35

Options group - Audio

3.5.14 The

Options

group

Three options are available for the XVP-1801:

•

Discrete AES and 16 Channel Internal Audio

Processing Option (XVP-1801-OPT-AUD)

•

the key/fill functionality (XVP-1801-XVP-OPT-

K)

•

the XVP-1801 Full Upgrade option (XVP-

1801- OPT-FULL).

To activate each of these options, you must

•

Obtain a licence key from Miranda

Technologies Inc.

•

Type the licence key in the box

•

Click on ENABLE OPTION to enable the

option’s features.

Audio option:

Enables discrete AES I/Os and 16-channel
internal audio processing.

Note: When the Audio option is not enabled, all
discrete AES I/Os and audio processing features
are disabled. If there is embedded audio in the
input signal, it passes through to the output signal.
However, when the Audio option is not enabled
(using a software key) BUT there are companion
audio cards installed and connected to the XVP-
1801 with the ABUS cable, the Audio Processing
and HD/SD Audio Output controls will be available
and functional.

XVP Key/Fill option:

This option is used to enable the background key/fill
functionality for the side panels and letterbox.

Figure 3.36

Options group – Key/Fill

«
...
49
50
51
52
53
...
»

Содержание DENSITE XVP-1801


































































Отзывы:

Нет отзывов