GUIDE TO INSTALLATION AND OPERATION
12
| XVP-1801
3.5 Remote control using iControl
The operation of the XVP-1801 may be controlled using Miranda’s iControl system.
•
This manual describes the control panels associated with the XVP-1801 and their use.
•
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the XVP-1801 icon to open the control panel.
3.5.1 The iControl graphic interface window
The basic window structure for the XVP-1801 is shown in figure 3.2. The window identification line gives the
card type (
XVP-1801
) and the slot number where the card installed in its Densité frame.
Figure 3.2
XVP-1801 iControl graphic interface window:
There are four main sections in the window itself, identified in figure 3.2:
1. The top section displays icons on the left. These icons report different statuses such as card
communication status, input signal and reference signal format and statuses. In some instances, they relate
to conditions defined through parameters settings.
Icon
#
1 2 3 4 5 6 7
Move the mouse over an icon and a status message appears below the icon providing additional information.
1
2
3
4