Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 65

Miranda DENSITE XVP-1801 Скачать руководство пользователя страница 14

GUIDE TO INSTALLATION AND OPERATION

10

| XVP-1801

Carrier 2 detect error (keyer mode)

Carrier 2 detect error (switcher mode)

Carrier 2 detect error (failover mode)

AES 1 presence error

AES 2 presence error

AES 3 presence error

AES 4 presence error

Silence detected Channel 1

Silence detected Channel 2

Silence detected Channel 3

Silence detected Channel 4

Silence detected Channel 5

Silence detected Channel 6

Silence detected Channel 7

Silence detected Channel 8

Silence detected Channel 9

Silence detected Channel 10

Silence detected Channel 11

Silence detected Channel 12

Silence detected Channel 13

Silence detected Channel 14

Silence detected Channel 15

Silence detected Channel 16

: Factory default.

If the LED is Flashing Yellow, it means that the card is selected for local control using the Densité frame’s
control panel. See Section 3.3 for details.

3.3 Local control using the Densité frame control panel

3.3.1 Overview

Push the SELECT button on the XVP-1801 card edge (see Section 1.4) to assign the local control panel to
operate the XVP-1801. Use the control panel buttons to navigate through the menu, as described below.

All of the cards installed in a Densité frame are connected to the frame’s controller card, which handles all
interaction between the cards and the outside world. There are no operating controls located on the cards
themselves. The controller supports remote operation via its Ethernet ports, and local operation using its
integrated control panel.

The local control panel is fastened to the controller
card by a hinged connector, and when installed is
located in the front center of the frame, positioned in
front of the power supplies. The panel consists of a
display unit capable of displaying two lines of text,
each 16 characters in length, and five pushbuttons.

The panel is assigned to operate any card in the
frame by pushing the SELECT button on the front
edge of that card.

Figure 3.1

Densité Frame local control panel

SELECT

ESC

+

-

CONTROLLER

«
...
12
13
14
15
16
...
»

Содержание DENSITE XVP-1801


































































Отзывы:

Нет отзывов