Miranda ASD-211i/2D Скачать руководство пользователя страница 2

 i 

WARRANTY POLICIES 

 

 

Warranty Statement 

 
Miranda Technologies Inc. warrants that the equipment it manufactures shall be free from defects in material 
and workmanship for a period of two (2) years from the date of shipment from the factory. If equipment fails 
due to such defects, Miranda Technologies Inc. will, at its option, repair or provide a replacement for the 
defective part or product. Equipment that fails after the warranty period, has been operated or installed in a 
manner other than that specified by Miranda, or has been subjected to abuse or modification, will be repaired 
for time and material charges at the Buyer’s expense. 
 
All out-of-warranty repairs are warranted for a period of ninety (90) days from the date of shipment from the 
factory. 
 
Miranda Technologies Inc. makes no other warranties, expressed or implied, of merchantability, fitness for a 
particular purpose or otherwise. Miranda’s liability for any cause, including breach of contract, breach of 
warranty, or negligence, with respect to products sold by it, is limited to repair or replacement by Miranda, at 
its sole discretion. In no event shall Miranda Technologies Inc. be liable for any incidental or consequential 
damages, including loss of profits. 
 
Effective January 1, 2002 

 

Warranty Exchange Policies 

 
Miranda Technologies Inc. warrants that the equipment it manufactures shall be free from defects in 
materials and workmanship for a period of two (2) years from the date of shipment from the factory. If 
equipment fails due to such defects, Miranda will provide repair of the failed unit under the terms of the 
Miranda warranty. 
 
If the equipment has been proven to be defective on arrival, Miranda will ship a new product in exchange, 
usually within 36 hours of factory notification. 
 
If the equipment to be repaired is essential and the customer so requests, Miranda will, at its option, provide 
a service replacement or loaner part or product, usually within 36 hours of factory notification, weekends and 
holidays excluded. 
 
All warranty exchange or loaner parts or products shall be shipped to the Buyer with a packing list clearly 
describing the items and stating the date of shipment. Repaired parts or products will be shipped to the 
Buyer with a similar packing list. In the case of exchange, the defective products or parts must be returned to 
Miranda within fifteen (15) days from receipt by the customer of the exchange product. In the case of a 
loaner, the loaned products or parts must be returned to Miranda within fifteen (15) days from receipt by the 
customer of the repaired equipment. 
 
If the equipment is not returned within fifteen (15) days, as described for either exchanges or loans, A Rental 
Invoice will be generated. Rental terms will be fifteen (15) percent of the current list price of the products or 
parts per month or a fraction thereof. Before returning the equipment to Miranda Technologies Inc., for any 
reason, the Buyer must first obtain a Return Authorization Number from Miranda Technologies Inc. Miranda 
Technologies Inc will pay freight and insurance charges for the delivery of the loaner or exchange products 
or parts. Freight and insurance charges for the return of the defective product or part will also be paid by 
Miranda Technologies. 

 

Out-Of-Warranty Repair Policy 

 
Miranda will repair equipment which is out of Warranty. The current pricing structure for this service is 
available from the Miranda web site at 

www.miranda.com

 or from Miranda Technical Support Services at 

(514) 333-1772. All out-of-warranty repairs are warranted for a period of 90 days from the date of shipment 
from the factory. Before returning the equipment to Miranda Technologies Inc., for any reason, the Buyer 
must first obtain a Return Authorization Number from Miranda Technologies Inc. In the case of a product 
deemed by Miranda to be beyond repair, the customer must purchase a new product at current retail prices. 
 
The Buyer will pay freight and insurance charges for the return of the defective product or part to the 
manufacturer for repair. MirandaTechnologies will pay freight and insurance charges for the return of the 
repaired product or part to the Buyer. 

 

Содержание ASD-211i/2D
























Отзывы: