Mipex MIPEX-02 1 Series, Руководство пользователя

Страница: 15 / 38

OPTOSENSE LLC
Design Department
USER MANUAL
SMALL-SIZE EXPLOSIVE GAS MEASURING SENSOR MIPEX-02-
Х-X-X.1 X
File name: ESAT.413347.006 UM v.2.0.docx Revision 2.0 27 August 2015 Page. 15 of 38
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.
Appendix A. Sensor types and characteristics.
MIPEX-02-B-C-D.1 A
Pins length version:
If not specified - 5.75 mm pins;
A
– 4.6 mm pins.
Output format:
1
– UART.
Construction:
1. - stainless
steel, “Standard”;
2. -
stainless steel, with side holes, “Fast
response”;
3.
– plastic.
Application:
I
– Group I, for mines;
II
– Group II, for places with a potentially
explosive atmosphere, other than mines;
(see Table 3 for details).
Target gas*:
1. - CH4, methane;
2. - C3H8, (CnHm, hydrocarbons);
3. - CO2, carbon dioxide;
4. -
CH4/CH4 +С2Н6 acc. to IEC 60079-29-1
MIPEX model number
* Term target gas means the model of the LED and photodiode with the spectral range
adjusted for best gas detection. Term calibration gas
– is the gas mixture used for the sensor
calibration.
There is an additional RX code presented on the sensor label. The code explains application
properties (see Table 3 for details):
R
– calibration gas and range;
X - temperature class and accuracy.