Minuteman XRT Series, Руководство пользователя

Страница: 13 / 17

13
Note: On all MINUTEMAN Plug and Play configurations, the red
connector is battery positive and the black connector is battery
negative.
5. After all connections have been made and verified to be correct,
reinstall the cover on the battery pack if it was removed. Insure all
cover screws are installed.
6. Reinstall the cover plates on the back of the UPS if they were
removed.
7. The unit is now ready for normal startup procedures as described in
the UPS owner's manual. Make sure all switches and breakers on all
units installed are placed in the ON position. Failure to have all of the
switches in the ON position may render the UPS inoperable or
reduce the runtime when multiple battery packs are installed.
For multiple battery pack installation, each battery pack is "daisy chained"
in a similar fashion, with the cable from the last battery pack connected to
the previous pack. Remove the protective strips only from the battery
connectors that you use.
STORAGE INSTRUCTIONS
If the Battery Pack is to be stored and not used for an extended period of
time, allow the batteries to fully charge for 24 hours. The unit should then
be kept in a cool, dry location. For extended storage in moderate
climates, the batteries should be charged for 8 hours every 3 months.
Repeat this operation every 2 months in high temperature locations.