Minuteman XRT Series, Руководство пользователя

Страница: 8 / 17

8
A suggested layout for stacking multiple battery packs should be
determined by the technician performing your installation. Each
installation is unique to the job site and should be reviewed and planned
PRIOR to moving this heavy equipment. Measuring the equipment and
the installation site may be required. Always make sure your floor
strength is sufficient to handle extreme weight when installing this heavy
equipment.
NOTE: Some MINUTEMAN XRT Battery Packs are designed for quick
connection (Plug and Play), while some are designed for hand wiring by a
qualified technician or electrician. Use appropriate cautions for each
model.
INSTALLATION PROCEDURES:
NOTE: MINUTEMAN XRT BATTERY PACKS ARE
AVAILABLE IN MULTIPLE CONFIGURATIONS. MAKE
SURE YOU FOLLOW THE PROCEDURES FOR THE
CONFIGURATION STYLE WHICH YOU ARE INSTALLING.
STYLE 1: PLUG & PLAY CONFIGURATION
STYLE 2: HARDWIRE CONFIGURATION
STYLE 3: HARDWIRE AND PLUG & PLAY COMBINATION
CONFIGURATION
STYLE 1: PLUG & PLAY CONFIGURATION INSTALLATION
1. Make sure the installation placement and caster removal procedures
mentioned above have been carefully followed.
2. Make sure the UPS Power switch is in the OFF position. If this
model of battery pack contains a circuit breaker, be sure that the
Battery Pack circuit breaker if in the OFF position.
3. Remove the self-stick protective strip from the rear of the UPS (not
required on all units) and from the battery pack cable.