Minuteman SCV 28/32, Операционное обслуживание комплектующих и уход, Страница: 24 / 84

24
SIDE SQUEEGEES
The side squeegees (left and right) are attached to the scrub decks. These items
channel the dirty solution to the rear squeegee, helping contain the water within the
machine’s cleaning path. These squeegees are raised when the scrub deck is in the
raised position.
The side squeegees are pre-adjusted at the factory. Adjustments may be required
when replacing worn blades or to achieve optimum performance for different
floors and conditions.
To adjust the side squeegees, simply loosen the mounting hardware (Two wing nuts for
Disk Scrub Deck, two black three-sided knobs for Cylindrical Scrub Deck). Lower the
scrub deck by switching to a scrubbing mode and when the brushes start up, turn off the
key switch. At this point the side squeegees should be resting vertically (no deflection)
on the floor. Press down on the side squeegee bracket assembly from each end while
making sure that the blade is uniformly deflected in a 45 degree angle along its whole
length. Tighten the wing nuts (item A). Turn the steering wheel all the way to the left or
right and start pushing the machine to the side to inspect the blade deflection and
wiping action. Repeat the steps above until a satisfactory result is obtained.
DISK DECK SIDE SQUEEGEE COMPONENTS
A
B
C Wing Nut for Squeegee Adjustment (2)
Helical Lock Washer for Squeegee Adjustment (2)
Flat Washer for Squeegee Adjustment (2)