Minolta EP3000, Руководство пользователя

Страница: 238 / 329

FrameMaker Ver.5.5E(PC) EP3000/EP3010 TROUBLESHOOTING
98.08.06
T-1
1. When servicing the copier with its covers removed, use utmost care to prevent your
hands, clothing, and tools from being caught in revolving parts including the chains and
gears. When servicing the copier with the Lower Rear Cover removed, be sure to install
the jig.
2. Before attempting to replace parts and unplug connectors, make sure that the power
cord of the copier has been unplugged from the wall outlet.
3. Never create a closed circuit across connector pins except those specified in the text
and on the printed circuit.
4. When creating a closed circuit and measuring a voltage across connector pins speci-
fied in the text, be sure to use the green wire (GND).
5. When the user is using a word processor or personal computer from a wall outlet of the
same line, take necessary steps to prevent the circuit breaker from opening due to over-
loads.
6. Keep all disassembled parts in good order and keep tools under control so that none
will be lost or damaged.
1. If a component on a PWB or any other functional unit including a motor is defective, the
text only instructs you to replace the whole PWB or functional unit and does not give
troubleshooting procedures applicable within the defective unit.
2. All troubleshooting procedures contained herein assume that there are no breaks in the
harnesses and cords and all connectors are plugged into the right positions.
3. For the removal procedures of covers and parts, see DIS/REASSEMBLY, ADJUST-
MENT.
4. The troubleshooting procedures are given in the order of greater frequency of trouble or
order of operation.
5. The procedures preclude possible malfunctions due to noise and other external causes.
1. The paper transport failure troubleshooting procedures are given according to the
symptom. First identify the location where the paper is present and start the procedure
for that particular location. For malfunction troubleshooting, start with step 1 and
onward.
2. Make checks in numerical order of steps and, if an item is checked okay, go to the next
step.
42 INTRODUCTION
42-1. General Precautions
42-2. How to Use This Book
42-3. Reading the Text
Pattern 1
Step Check Item Result Action
1 Is--? YES Do this.
2
Go to step 2 if it checks okay.
Pattern 2
Step Check Item Result Action
1 Is--?
YES Do this.
NO Check that.
2
Go to step 2 if it checks okay.