Minolta EP3000, Руководство пользователя

Страница: 139 / 329

FrameMaker Ver.5.5(PC) EP3000/EP3010 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.05.29
S-33
[Tech. Rep. Mode Last Trouble]
(7) RD Mode
Touch Panel
Display
Setting (The default is .)
RD Mode Make the initial settings of the copier for the Data Terminal.
ID Code Entering a 7-digit ID code from the 10-Key Pad enables making the
following settings. When the ID code is entered and transmitted after
the initial settings have been made, it executes the transmission of
MAINT. START to the Center.
Maintenance Used to make the initial settings and various transmissions.
DT Setting Enter the following data.
CT-ID Enter the 4-digit ID number of the Center which has been pro-
grammed in the Center personal computer.
DT-ID Enter the 6-digit ID number of the Data Terminal.
TEL No. Enter the 19-or-less-digit phone number of the modem connected to
the Center personal computer.
NOTE
1. When the office extension and outside line use different systems,
enter “P” for a “pulse” telephone line or “T” for a “tone” telephone
line before the outside line number.
2. The time it takes the private branch exchange (PBX) system to
switch from the extension line to the outside line varies depending
on the type of PBX system used. Set this time as follows.
Fixed switching time: Enter the pause code “–” (a single “–” lasts
2 sec.).
Varying switching time:Enter the wait code “W.”
Common DT Settings of the following functions.
Dial Mode Select the type of telephone line of the user.
Auto
Receive Define “Yes” or “No” for the auto reception function.
NOTE
Select “Yes” if the line is dedicated to the Date Terminal.
Result Code Set the value according to the type of modem on the copier.
NOTE
Don’t use this function as long as “5” has been set for it.
Report
Format Japan only
RAM Clear Reinitializes the Data Terminal.
▲
Highlighted
Pulse line Tone line
Pulse Tone
YES
NO
10 BIT
Maintenance
NO