3/6
4/6
Auto Panel Reset
Select the time it takes the auto panel reset
function to be activated from among "30
sec.," "1 min.," "2 min.," "3 min.," or "5
min.," or not activate the function at all ("No
Reset").
The initial setting is "1 min."
Energy Saver Mode
Set the time it takes the copier to enter the
Energy Saver mode, from 1 to 120 min. (in
1-min. increments). The Energy Saver
function can even be disabled.
The initial setting is "15 min."
Drum Dehumidifier
Select whether to allow ["ON (Auto)"] the
copier to enter into the Drum Dehumidifier
mode automatically after it has been turned
ON, or not ("OFF").
The initial setting is "OFF."
Counter Removal
Select whether to reset the panel ("ON") or
not ("OFF") when the Plug-In Counter is
pulled out of the copier or a magnetic card is
pulled out of the Data Controller.
The initial setting is "ON."
Intelligent Sort
Select whether to turn "ON" or "OFF" the
function that automatically switches
between Sort and Non-Sort, selecting
Non-Sort if only a single original is loaded
and Sort if two or more originals are loaded
in the document feeder.
The initial setting is "ON."
Confirmation Beep
Select whether to turn "ON" or "OFF" the
beep that sounds each time a key on the
Touch Panel is touched.
The initial setting is "ON."
Original Thickness
Select whether to allow ("Thin") the user to
make copies from thin originals in addition
to the standard ones or not ("Standard")
using the document feeder.
The initial setting is "Standard."
Smaller Originals
Select whether to enable ("ON") a copy
cycle or not ("OFF") when it is initiated by
pressing the Start key with no originals
placed on the Original Glass or with an
original smaller than the detectable size
placed on the Original Glass in the Auto
Paper mode.
If "ON" is selected, the copy cycle is run
using the paper loaded in the default paper
source. If "OFF" is selected, a warning
message appears to instruct the use to select
paper.
The initial setting is "OFF."
Ch
a
p
te
r 4
Us
in
g th
e Us
er
M
o
d
e
4. User’s Choice
86
