Minolta EP2080 Скачать руководство пользователя страница 126

Страница: 126 / 148

Message

Cause

Action

Original(s) left on the Glass.

You have left an original on the
Original Glass.

Remove the original from the
Glass.

2-sided copying is not possible on
paper sizes less than A5 size.

You have selected a paper size that
is not good for 2-sided copying.

Select a standard copy paper size
of B5 or larger, or cancel 2-sided
copying.

Sorting or Grouping is not possible
with

A5 ,

B6 or

5-1/2

8-1/2 paper

sizes.

You have selected a copy paper
size not good for Sort or Group.

Select a standard copy paper size
of A5 (5-1/2"

8-1/2") or larger,

or cancel Sort or Group.

Stapling is not possible on paper
sizes less than B5 size.

You have selected a copy paper
size not good for Sort Staple.

Select a standard copy paper size
of B5 or larger, or cancel Sort
Staple.

Hole-Punching is only possible
with

A3 and

A4 sizes.

You have selected a copy paper
size not good for Hole Punch.

Select the specified paper size or
cancel Hole Punch.

Matching paper size isn’t available.
Reselect paper size or change
zoom.

No drawers contain paper of the
right size to run a copy cycle in the
Auto Paper mode.

Cancel Auto Paper and select the
appropriate copy paper size or
change the zoom ratio.

Matching paper size isn’t available.
Please change direction of original.

The copy paper of the calculated
size is loaded in a direction
different from that of the original
to run a copy cycle in the Auto
Paper mode.

Change the direction of the
original.

Auto Sizing is not possible. Select
another zoom method or paper size.

The zoom ratio calculated based on
the original size and copy paper
size is outside the range from

0.5

2.0 to run a copy cycle in the

Auto Size mode.

Cancel Auto Size and select the
appropriate zoom ratio or change
the copy paper size.

Please load Cover paper into the
source indicated below.

Paper for covers has run out.

Load paper for covers.

Paper for covers is not loaded.

Please load Insert sheets into the
indicated paper source.

The paper source specified for
inserts has run out of paper.

Load the specified paper source
with the paper for inserts. ("1.
When the Message ’The current
Paper Drawer is empty.’ Appears"

➭

p.102)

The paper source specified for
inserts is not loaded with paper.

To staple, please remove all the
remaining copies from the Sorter.

A stapled copy set/stack is left in
the Sorter Bin.

Remove all copies from the Sorter
Bins or cancel Sort Staple.

Remove copies from the Sorter.

A copy or copies are left in the
Sorter Bins.

Remove all copies from the Sorter
Bins.

Please load the originals into the
Document Feeder.

The originals are not loaded in the
document feeder, though a mode
that requires the document feeder
(Cover, Page Insertion, etc.) has
been set.

Load the originals in the document
feeder.

Copies remain in the Duplex Unit,
please press START to feed them
out.

A copy or copies are left in the
Duplex Unit.

Press the Start key to feed the
copies out of the Duplex Unit and
out onto the Exit Tray.

Manual Feeding cannot be
combined with duplexing. Cancel
either one.

Two-sided copying is not possible
with paper loaded in the Multi
Bypass Tray.

Select another paper source or
1-sided copying.

XXX

and

OOO

cannot be

combined.

You have set two functions that
conflict with each other.

Cancel either one of the two
functions.

r 5

a M

sag

e A

ppea

6. What Does Each Message Mean?

124

Содержание EP2080





















































































































































Результаты поиска

Содержание EP2080

Отзывы:

Похожие инструкции для EP2080

Бренды по названию

Популярные бренды

Minolta EP2080, Руководство оператора

Результаты поиска

Содержание EP2080

Отзывы:

Похожие инструкции для EP2080

Бренды по названию

Популярные бренды