Minolta EP2080, Руководство оператора

Страница: 27 / 148

The Panel Reset key resets all control panel
settings to default settings including the
number of copies and zoom ratio.
* If a document feeder is used, any
original left on the Glass will be ejected
out of the unit.
Panel Resetting
The time for the copier to enter the Auto
Panel Reset Function can be changed to 30
sec.
➭
p. 86
Useful Tip
If no key on the control panel is pressed within
60 sec. after a copy cycle has been completed
or copying settings made, the Auto Panel Reset
function is activated to return the copier to the
default settings.
Auto Panel Reset
•
The Panel Reset key enables you to
cancel all previous settings at the touch of
the key.
•
To avoid miscopy, try to press this key
before making any setting for your own
copy job.
Useful Tips
If you load originals in the document feeder
and press the Start key while the copier is
warming up after it has been turned ON, the
Auto Copy Start function allows that copy
process to be started as soon as the copier
completes warming up.
Auto Copy Start
7. Auxiliary Functions
The time for the copier to enter the Auto
Power-OFF mode can be selected from 1 to
120 min. The Auto Power-OFF function can
even be disabled.
For details, see User’s Choice.
➭
p. 88
Useful Tip
The Auto Power-OFF function shuts down the
copier a given period time after the copier has
been used last. The initial setting is 60 min.
Auto Power-OFF
The copier is automatically shut down if
the Auto Power-OFF function is activated
while it is in the Energy Saver mode.
NOTE
If the copier is shut down when it is not in use,
it takes the copier some time to complete the
warm-up cycle. Instead of turning the copier
OFF, it’s a good idea to use the Energy Saver
mode which will minimize the time for the
copier to complete the warm-up cycle to about
30 sec.
To set the copier into the Energy Saver mode,
you need only to press the Energy Saver key.
Or, a given period of time after the copier has
been touched last, it automatically enters the
Energy Saver mode. The initial setting is 15
min.
To cancel the Energy Saver mode, press any
key on the control panel.
Energy Saver
The time for the copier to enter the Energy
Saver mode can be selected from 1 to 120
min. The Energy Saver function can even be
disabled.
For details, see User’s Choice.
➭
p. 86
Useful Tip
Ch
a
p
te
r 2
G
e
tt
in
g
to
K
n
ow
A
b
o
u
t Y
o
u
r C
o
p
ie
r
21