7. Auxiliary Functions
The Interrupt function allows you to interrupt a
current job and run a different one. Pressing
the Interrupt key once sets the copier into the
Interrupt mode. Pressing the key again lets
copier leave the Interrupt mode, returning to
the previous settings.
Interrupt
•
If the current job involves 2-sided
copying, Cover function, Pages Insertion
or OHP Interleaving, the copier rejects
an Interrupt cycle.
•
If the current job involves a finishing
function other than Non-Sort, Non-Sort is
automatically selected at the same time
when an Interrupt function is invoked.
Useful Tips
When the initial screen reappears, you
can now start a copy cycle.
2
From the 10-Key Pad, enter the 4-digit
access number and press the Access
Mode key.
1
•
If an access number has been
programmed, a copy cycle can be
initiated only after the access number
has been input to the copier.
<"Access #" Prompt Screen>
NOTES
By pressing the Mode Check key on the
control panel, you can either check for or
change the current settings.
Mode Check
•
When you touch [Exit] after having checked
the currently set functions, the Basic screen
reappears.
•
To change a certain function, touch the
corresponding key and then make the
necessary change.
When the copy cycle is completed,
press the Access Mode key again.
3
If an access number has been programmed, it
allows only particular persons to use the copier
or a supervisor to keep track of the number of
copies made by a particular department..
Access Number
•
Before you can use this function, you
must first turn "ON" the "Copy Track"
function of the Administrator Mode
available from User’s Choice.
➭
p. 88
Entering the Access Number
1
2
3
4
5
6
7
8
9
0
C
1134P438DA
To correct the 4-digit access number
entered, first press the Clear key, then
enter the new number.
NOTE
1134P438DA
1149O259CA
1149O271CA
Ch
a
p
te
r 2
G
e
tt
in
g
to
K
n
ow
A
b
o
u
t Y
o
u
r C
o
p
ie
r
22
