Minolta CA-100PLUS -, Инструкция по эксплуатации

Страница: 21 / 126

18 18
6
Cursor key ( ) ...................................... • Used to switch from one option to another in the PROBE, SYNC,
Measurement Speed, Number of Digits, Calibration Standard and
RS232C baud rate screens, which are opened from the menu selec-
tion screen.
7
ENTER key ( ) .................................... • Used to confirm each setting/selection you have made.
8
White, Red, Green, .................................. • Used to set RGB emission characteristics of the display.
Blue keys ( )
1
Holding down the key ....................... Locks all the keys except for the 0-CAL key. Holding down this
for two seconds or more key again for two seconds or more will unlock the keys.
(Whistling sound.)
2
Holding down the key ....................... Stores the current settings (probe, SYNC, measurement speed, number
for five seconds or more of display digits, calibration standard, RS232C baud rate, memory
(Bleeping sound. A whistling sound channel, measurement mode) to the instrument. The settings will be
is heard when the setting is saved.) effective when the power is turned on next time.
3
Holding down the MR key .................... When xyLv, T
∆
uvLv or XYZ measurement mode is selected
for two to four seconds Displays serial number of the probe in use at the time calibration to
a user selected reference was performed and the target color were
set. (Page 74)
When an analyzer mode is selected
Displays serial number of the probe in use at the time RGB emission
characteristics of the display and the target color (W) were set. (Page
74)
When flicker mode is selected
“00000000” will be displayed. (Page 74)
4
Holding down the MR key .................... The unit of intensity will be displayed. (cd/m
2
)
for four seconds or more
(Bleep sounds two seconds later and
then four seconds later.)
5
Holding down the REMOTE key .......... The mode will switch to CA-100 compatible mode and CA-200
for two seconds or more mode alternately. (Page 15)
when turning on the power
(Bleeping sound.)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com