MINOLTA-QMS magicolor 2350, Руководство пользователя

Страница: 138 / 208

Solving Problems with Printing Quality 136
En
g
lis
h
The print or
color density
may be
uneven. One or more of the
toner cartridges may
be near empty or
damaged. Install new toner cartridges. (Quality/
Toner/Replace)
The OPC drum may
have been installed
improperly or be
defective. Reinstall the OPC drum cartridge. If
necessary, replace the OPC drum
cartridge and waste toner bottle.
The printer is not on a
level enough surface. Level the printer (not exceeding ±1 °
slant at any point around the machine).
Irregular
print or
mottled
image
appears. The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Humidity may be too
high. Adjust the humidity in the paper
storage area.
Media doesn ’ t meet
printer specifications.
Use media that is covered by the
printer warranty. For information about
approved media, go to
www.minolta-qms.com. After selecting
your country, choose Support &
Drivers, select your printer, and then
choose Media Recommendations.
One or more of the
toner cartridges is
defective. Remove the toner cartridge (Quality/
Toner/Replace) and check for
damage. If necessary, replace it.
The OPC drum
cartridge is damaged. Remove the OPC drum cartridge and
check for damage. If necessary,
replace the OPC drum cartridge and
waste toner bottle.
There is
insufficient
fusing or the
image comes
off when
rubbed. The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Media with
specifications not
covered by the printer
warranty is being
used. For information about approved media,
go to www.minolta-qms.com. After
selecting your country, choose Support
& Drivers, select your printer, and then
choose Media Recommendations.
The media type may
be incorrectly set. When printing envelope, glossy stock,
labels, transfer media, transparencies,
and thick stock, the appropriate media
type must be specified in the printer
driver and the printer control panel.
Symptom Cause Solution