ULTERRA
Q: Is there a trolling motor battery meter on Ulterra?
A: Yes. The motor battery meter is displayed on the i-Pilot or i-Pilot Link remote control LCD screen. Battery meter is displayed when
prop is off .
Q: Which quick release brackets are compatible with Ulterra
A: The following quick release brackets can be used with UIterra: MKA-32, MKA-16-02, RTA 17 and RTA 21.
Q: Is there a manual Stow and Deploy procedure?
A: Yes. There is a manual method for stowing Ulterra. See the Emergency Stow Procedure section for instructions.
Q: When Ulterra is deployed, at what depth does the deploy stop?
A: Ulterra will always deploy to the most recent depth that was used.
Q: Are the Ulterra and Terrova foot pedals interchangeable?
A: No. The foot pedals are not interchangeable.
Q: If I engage Spot-Lock on the foot pedal, which Spot-Lock position on the remote is used?
A: i-Pilot: When Spot-Lock is activated from the foot pedal it will always utilize position “A” on the remote.
A: i-Pilot Link: When Spot-Lock is enabled from the foot pedal, the user has the option of saving or discarding the Spot-Lock
loction. If saved, the next available Spot-Lock number will be utilized.
Q: What is the “Mode” button on the foot pedal?
A: The Ulterra foot pedal is dual function. When it is in “Ulterra” mode, the yellow LED light will be illuminated. In this state the foot
pedal toe buttons can be used to auto stow and deploy the motor and control trim. When it is in “steering” mode, the yellow LED
will be off . In this state the foot pedal toe buttons can be used to control steering and prop on/off . In either state, the heel/toe pad
can be used to control steering.
Q: Is there a way to clean weeds from the lower unit?
A: Yes. During the process of stowing, the stow cycle can be stopped by pressing the stow/deploy button as the motor begins to tilt
back. The lower unit is easily accessible at this point to clear weeds. A second button press of the stow/deploy cycle will re-deploy
the motor to its previous position.
Q: Can I stow the motor with the prop in or out?
A: Yes, the motor can be confi gured to stow with either the prop in or out. Follow the procedure outlined in the Installation Mounting
Options section.
ULTERRA
Q: Is there a trolling motor battery meter on Ulterra?
A: Yes. The motor battery meter is displayed on the i-Pilot or i-Pilot Link remote control LCD screen. Battery meter is displayed when
prop is off .
Q: Which quick release brackets are compatible with Ulterra
A: The following quick release brackets can be used with UIterra: MKA-32, MKA-16-02, RTA 17 and RTA 21.
Q: Is there a manual Stow and Deploy procedure?
A: Yes. There is a manual method for stowing Ulterra. See the Emergency Stow Procedure section for instructions.
Q: When Ulterra is deployed, at what depth does the deploy stop?
A: Ulterra will always deploy to the most recent depth that was used.
Q: Are the Ulterra and Terrova foot pedals interchangeable?
A: No. The foot pedals are not interchangeable.
Q: If I engage Spot-Lock on the foot pedal, which Spot-Lock position on the remote is used?
A: i-Pilot: When Spot-Lock is activated from the foot pedal it will always utilize position “A” on the remote.
A: i-Pilot Link: When Spot-Lock is enabled from the foot pedal, the user has the option of saving or discarding the Spot-Lock
loction. If saved, the next available Spot-Lock number will be utilized.
Q: What is the “Mode” button on the foot pedal?
A: The Ulterra foot pedal is dual function. When it is in “Ulterra” mode, the yellow LED light will be illuminated. In this state the foot
pedal toe buttons can be used to auto stow and deploy the motor and control trim. When it is in “steering” mode, the yellow LED
will be off . In this state the foot pedal toe buttons can be used to control steering and prop on/off . In either state, the heel/toe pad
can be used to control steering.
Q: Is there a way to clean weeds from the lower unit?
A: Yes. During the process of stowing, the stow cycle can be stopped by pressing the stow/deploy button as the motor begins to tilt
back. The lower unit is easily accessible at this point to clear weeds. A second button press of the stow/deploy cycle will re-deploy
the motor to its previous position.
Q: Can I stow the motor with the prop in or out?
A: Yes, the motor can be confi gured to stow with either the prop in or out. Follow the procedure outlined in the Installation Mounting
Options section.
minnkotamotors.com | 39
©2015 Johnson Outdoors Marine Electronics, Inc.
fAQ
