background image

30  |  minnkotamotors.com

©2018 Johnson Outdoors Marine Electronics, Inc.

FOR FURTHER TROUBLESHOOTING AND REPAIR

FOR FURTHER TROUBLESHOOTING AND REPAIR

We offer several options to help you troubleshoot and/or repair your product. Please read through the options listed below.

Buy Parts Online

You can buy parts on-line directly from our website at 

minnkotamotors.com

. Orders confirmed by 12 Noon Central Time, with 

Overnight Shipping selected, should ship the same business day if the parts are in stock. All other orders should ship within the 
next 3 business days, depending on the shipment method chosen, and if the parts are in stock.

Frequently Asked Questions

We have FAQs available on our website to help answer all of your Minn Kota questions. Visit

 minnkotamotors.com

 and click on 

“Frequently Asked Questions” to find an answer to your question.

Call Us (for U.S. and Canada)

Our consumer service representatives are available Monday – Friday between 7:00 a.m. – 4:30 p.m. CST at 800-227-6433. If you 
are calling to order parts, please have the 11-character serial number from your product, specific part numbers, and credit card 
information available. This will help expedite your call and allow us to provide you with the best consumer service possible. You can 
reference the parts list located in your manual to identify the specific part numbers.

Email Us

You can email our consumer service department with questions regarding your Minn Kota products. To email your question, visit 

minnkotamotors.com

 and click on “Support”.

Authorized Service Centers

Minn Kota has over 800 authorized service providers  in the United States and Canada where you can purchase parts or get your 
products repaired. Please visit our Authorized Service Center page on our website to locate a service provider in your area.

Scan to visit Minn 
Kota  service online.

ENVIRONMENTAL COMPLIANCE STATEMENT

It is the intention of JOME to be a responsible corporate citizen, operating in compliance with known and applicable environmental 
regulations, and a good neighbor in the communities where we make or sell our products.

WEEE DIRECTIVE

EU Directive 2002/96/EC “Waste of Electrical and Electronic Equipment Directive (WEEE)” impacts most distributors, sellers, and 
manufacturers of consumer electronics in the European Union. The WEEE Directive requires the producer of consumer electronics to 
take responsibility for the management of waste from their products to achieve environmentally responsible disposal during the product 
life cycle.

WEEE compliance may not be required in your location for electrical & electronic equipment (EEE), nor may it be required for EEE 
designed and intended as fi xed or temporary installation in transportation vehicles such as automobiles, aircraft, and boats. In some 
European Union member states, these vehicles are considered outside of the scope of the Directive, and EEE for those applications can 
be considered excluded from the WEEE Directive requirement.

This symbol (WEEE wheelie bin) on product indicates the product must not be disposed of with other household 
refuse. It must be disposed of and collected for recycling and recovery of waste EEE. Johnson Outdoors Inc. will mark 
all EEE products in accordance with the WEEE Directive. It is our goal to comply in the collection, treatment, recovery, 
and environmentally sound disposal of those products; however, these requirements do vary within European Union 
member states. For more information about where you should dispose of your waste equipment for recycling and 
recovery and/or your European Union member state requirements, please contact your dealer or distributor from which 
your product was purchased.

DISPOSAL

Minn Kota motors are not subject to the disposal regulations EAG-VO (electric devices directive) that implements the WEEE directive. 
Nevertheless never dispose of your Minn Kota motor in a garbage bin but at the proper place of collection of your local town council. 

Never dispose of battery in a garbage bin. Comply with the disposal directions of the manufacturer or his representative and dispose of 
them at the proper place of collection of your local town council.

Содержание ENDURA MAX Engine Mount 160





































Отзывы: