MINN KOTA ENDURA MAX Engine Mount 160, Руководство пользователя

Страница: 16 / 36

16 | minnkotamotors.com
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE CONTROL MODULE AND CONNECTING IT TO THE MOTOR
3h
Shrink Tube
Positive (+) Lead Wire
from Control Module
(violet)
Positive (+)
Lead Wire
from Motor
(violet)
Shrink Tube
Negative (-)
Lead Wire from
Control Module (gray)
Negative (-)
Lead Wire from
Motor (gray)
g. Take the first Positive (+) Lead Wire (violet) from the
Control Module and slip a Heat Shrink (Item #10)
over it. Connect the Positive (+) Lead Wire (violet)
from the Control Module to the Positive (+) Lead
Wire (violet) from the first Motor.
h. Slip a Heat Shrink over the first Negative (-) Lead
Wire (gray) from the Control Module. Connect the
Negative (-) Lead Wire (gray) from the Control
Module to the Negative (-) Lead Wire (gray) from
the first Motor. The Power Leads for the first Motor
should now be connected and the second motor can
now be connected.
3
ITEM(S) NEEDED
#10 x 2
3h
Set 1
Set 2
Set 1
Shrink Tube
Shrink Tube
Positive (+) Lead Wire
from Control Module
(violet)
Negative (-)
Lead Wire from
Control Module (gray)
Positive (+) Lead
Wire from Motor
(violet)
Negative (-)
Lead Wire from
Motor (gray)
3g
Set 1
3g
Positive (+)
Lead Wire from
Motor (violet)
Negative (-)
Lead Wire from
Motor (gray)
Negative (-)
Lead Wire from
Control Module
(gray)
Positive (+) Lead
Wire from Control
Module (violet)
Set 1
Shrink Tube