minnkotamotors.com | 11
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE ENGINE MOUNT
2
2b
2d
ITEM(S) NEEDED
#20 x 2
b. Clamp or hold the Mounting Bracket in place and
carefully mark the Anti-ventilation plate at each
Mounting Hole on the Mounting Bracket. Remove the
Clamps and set the Engine Mount Assembly aside.
c. Use a Drill with a 3/8" Drill Bit to drill through the
Anti-ventilation Plate on the marked locations.
d. Place the Insulator Pad (Item #20) between the feet
of the Mounting Bracket and the Anti-ventilation
Plate and clamp or hold the Engine Mount Assembly
back in place aligning the Mounting Holes with the
Drilled locations.
Anti-ventilation
Plate
Mounting
Bracket
Anti-ventilation
Plate
Drill
Marked
Location
Insulator
Pad
Drill
Marked
Location
Содержание ENDURA MAX Engine Mount 160
Страница 1: ...ENGINE MOUNT TROLLING MOTOR Owner s Manual...
