MINN KOTA ENDURA MAX Engine Mount 160, Руководство пользователя

Страница: 13 / 36

minnkotamotors.com | 13
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE ENGINE MOUNT
4
ITEM(S) NEEDED
#4 x 6 #8 x 6 #12 x 6
h. Using six of the Fender Washers (Item #4), place one
Washer on the end of each Screw and secure each
with a Nylon Lock Nut (Item #8).
i. Be sure to leave enough slack in the cable to raise
and lower the Outboard Engine. Use the Cable Ties
supplied (Items #12) to secure the Engine Mount
cable to the engine housing or to other cables on
the boat to prevent snagging, and to make sure that
the cable does not become lodged underneath the
engine bracket when it is raised and lowered. Make
sure the cable between the Motor and Cable Hook is
snug and does not have excessive slack.
j. Check that the cable does not get caught or kinked
by turning the Outboard Engine in its full range from
side to side or from lock to lock. The Cable from the
Electric Outboard will be connected to the Cable
from the Control Module later in the installation.
Nylon Lock Nut
Fender
Washer
4h