MINN KOTA ENDURA MAX Engine Mount 160, Руководство пользователя

Страница: 15 / 36

minnkotamotors.com | 15
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE CONTROL MODULE AND CONNECTING IT TO THE MOTOR
e. Once the Control Module is secured, the Power
Leads from the Motors need to be connected. Each
Motor has its own set of Power Leads that should be
connected to separate Power Leads from the Control
Module.
f. Determine which of the two motors will be connected
first and which of the two Power Leads from the
Control Module will be used. Once a set has been
selected, completely connect the Lead Wires from
the first set before moving to the second set. Do not
cross Lead Wires between the sets.
2
2f
NOTICE:
Do not apply lubricant or any type of
grease to trolling motor connectors.
2e
Motor Power
Leads
Control Module
Power Leads
Control Module
Power Leads
Motor Power
Leads
2e
Set 1
Set 2
Set 2
Set 1
Positive (+)
Lead Wire from
Motor (violet)
Negative (-)
Lead Wire from
Motor (gray)
Negative (-)
Lead Wire from
Control Module
(gray)
Positive (+) Lead
Wire from Control
Module (violet)
Set 1