35
Chapter 6. Use
EN
6.1. Cleaning for the first time
•
Refer to the 7.1. "Cleaning and maintenance" paragraph.
•
Wipe all parts with a damp cloth before the first use.
6.2. First start-up
Set the main switch (1), located on the rear of the machine (for MX 2 only).
Turn the appliance on by holding down the button
for at least 1 second.
The display (3) lights up and the following is requested in sequence:
•
Calibration of the display.
•
Language selection.
•
Time zone setting (in automatic mode via connection to the Wi-Fi network, or in manual mode).
6.3. Daily use
Turn the appliance on by holding down the button
for at least 1 second.
Wait until the “Home page” appears on the display (3).
Mine
It enables to create/store new recipes and then run the packaging cycle.
Marination
It allows you to run the recipe for marinating food.
You can create/store your new recipes in the
menu.
Preservation
It allows you to pack vacuum-packed foods in pouches and/or trays choosing
from 7 standard recipes, programmed according to the type of food to be
packaged.
Infusion
It allows you to prepare an infusion.
You can create/store your new recipes in the
menu.
Sous Vide
It allows you to pack vacuum-
packed foods for “Sous Vide” low temperature
cooking.
Depending on the food, you can choose from 8 standard recipes, programmed
according to the type of food to be packaged.
•
Select the desired packaging recipe (see par. 6.4).
•
Lift the cover (6) and place the pouch containing the food to be packed inside the tank (4), leaving at least 2 cm
beyond the sealing bar (5).
If the “GAS” function is on, the pouch must be positioned with the strip open on the gas nozzle on one side of the
sealing bar.
It is important not to soil the pouch in the sealing area so as to guarantee a perfect seal. For this reason, it is advisable
to fold the inner side of the pouch outwards by 4-5 cm. Once the food is inserted, fold the pouch again in its initial
condition.
•
Close the cover (6) by pressing gently and press the Start button. The packaging cycle will then start.
•
At the end of the cycle, open the cover (6) and remove the pouch.
•
After use, turn off the appliance by pressing
.
