mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
38
5.2
C
ROSSOVER
(96
K PLUGIN ONLY
)
Each output channel of the PWR-ICE2-2x2 (96k plugin) has independent high pass and low pass filters. Click on
the Xover button to open the crossover settings window:
There is one filter for high pass (low cut) and one for low pass (high cut). The above example shows output
channel 1 with a pair of filters: an 18 Hz high pass filter and a 2000 Hz low pass filter. Overlaid in light gray is the
crossover filter for output channel 2, which is a high pass filter, also at 2000 Hz but with a different slope.
Each filter can be set to one of a range of filter types and slopes. The filter type de termines the shape of the
filter around the crossover point, and the filter slope (expressed in dB/octave) determines how steep the filter
cutoff is.
Basic/Advanced
By default, the crossover is in basic mode, and shows the controls described below. Advanced
mode enables custom biquad programming for almost infinite flexibility in crossover filter
implementation. This is described in
.
Cutoff Frequency
Sets the nominal cutoff frequency of the crossover. In actual fact, of course, the crossover has a
more or less gradual transition from “full on” to “full off,” as determined by the filter slope.
