miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
9
1.3
C
ONFIGURATION STEPS
(
BASIC MODE
)
The steps for configuring the
DDRC-88D
audio processor with Dirac Live® are summarized as follows:
1.
Connect the
DDRC-88D
audio processor into your system and install
software. See Section 2, Hardware Connectivity and Section 3,
Software Installation.
2.
Run a series of acoustic measurements using the
Dirac Live
Calibration Tool for miniDSP
program, to capture the acoustic
behavior of your speakers and room. See Section 5, Acoustic
Measurement for Dirac Live.
3.
Generate digital room correction filters that will be executed by the
DDRC-88D
processor. Up to four filter sets can be downloaded into
the processor for easy real-time recall and auditioning. See Section
6, Dirac Live Filter Design.
4.
Once the digital room correction filters are designed and
downloaded, the computer can be disconnected for normal
listening. See Section 7, Using the DDRC-88D Audio Processor
.
