miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
22
5.3.1
Select the configuration/preset (enhanced/bass management mode)
If you are running the plugin in enhanced/bass management mode
and
have changed the settings on the
Mixer
or
Outputs
tabs away from the defaults, then you must ensure that you have selected the correct
configuration/preset prior to running measurements for Dirac Live calibration.
If you are running the plugin in basic mode, or have not made changes to the
Mixer
or
Outputs
tabs, then it
does not matter which configuration/preset is selected.
5.3.2
Sound System tab
On the
Sound System
tab, set the following parameters.
Choose system configuration
Use the dropdown menu to select your system configuration.
For multi-channel surround-sound, use
5.1 Speaker System
or
7.1 Speaker System
if it is desired
that Dirac Live calibrate for
a 10 dB “LFE alignment gain” to the subwoofer channel.
If the
calibration for LFE alignment gain is not required or if a different speaker configuration is
required, use
Custom System
. (See
Custom System configuration
on page 25 for further
information.)
Test signal playback device
Preset to
DDRC-88
. This will ensure that test signals are sent into your audio system via the
DDRC-88D
processor.
If the entry for
DDRC-88
is not showing, check that your
DDRC-88D
processor is connected via
USB and powered on, click the
Rescan
button, and then use the drop-down menu to select
DDRC-88
.
If that still doesn’t work, see Section
9.4, Troubleshooting.
Once you have verified that this tab is correct, click the
Proceed
button.
