miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
36
6.3
G
ENERATING CORRECTION FILTERS
Once you have a target curve set to your satisfaction, click on the
Optimize
button.
The status bar will update as the algorithm progresses. The entire algorithm may take some time to complete,
depending on the speed of your computer. When the algorithm completes, the predicted average magnitude
response will be shown in green. (The predicted impulse response can be viewed by clicking on the
Impulse
button.)
Dirac Live Calibration Tool for miniDSP
will contact the Dirac license server to verify its license, so
you will need to be connected to the Internet to perform this step. If a firewall is in place, it must
allow HTTP (normal web traffic) to pass. Otherwise, an error such as the following may appear:
Once the filters are generated, click the
Proceed
button.
